Impala V6-3.8L VIN K (2004)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet
HEATER HOSE REPLACEMENT - OUTLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the fuel injector sight shield.
3. Use J 38185 in order to position aside the heater hose outlet clamp at the pipe adapter.
4. Disconnect the heater outlet hose from the pipe adapter.
5. Use J 38185 in order to position aside the heater core outlet hose clamp.
6. Disconnect the heater outlet hose from the heater core.
7. Remove the heater outlet hose from the support bracket.
INSTALLATION PROCEDURE
1. Install the heater outlet hose to the support bracket.
2. Connect the heater outlet hose to the heater core.
3. Use J 38185 in order to secure the heater core hose outlet clamp.
4. Connect the heater outlet hose to the pipe adapter.
5. Use J 38185 in order to secure the heater hose outlet clamp.
6. Install the fuel injector sight shield.
7. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
