Impala V6-3.8L VIN K (2004)
5. Install the lower engine mount strut bracket bolts.
-
Tighten the lower engine mount strut bracket bolts to 50 Nm (37 ft. lbs.).
6. Install the lower engine mount strut bracket nut.
-
Tighten the lower engine mount strut bracket nut to 30 Nm (22 ft. lbs.).
7. Install the right engine mount strut to the upper engine mount strut bracket.
8. Install the fuel injector sight shield.
9. Connect the negative battery cable.
Lower
Engine Mount Strut Bracket Replacement - Right Lower
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the lower engine mount strut bracket bolts.
3. Remove the lower engine mount bracket nut.
4. Remove the lower engine mount bracket.
Installation Procedure