Impala V6-3.8L VIN K (2004)
23. Remove the engine mount upper nuts.
24. Remove the engine mount from the engine mount bracket.
Installation Procedure
1. Install the engine mount to the engine mount bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount upper nuts to the engine mount and the engine mount bracket.
-
Tighten the engine mount upper nuts to 43 Nm (32 ft. lbs.).
3. Install the engine mount bracket with the engine mount to the engine.
4. Loosely install the right engine mount bracket bolts to the engine.