Impala V6-3.8L VIN K (2004)
3. Position the P-clip to the left engine mount strut bracket bolt.
Important: The engine mount strut bolt must always be installed as shown in the graphic.
4. Install the bolt and the nut to the left engine mount strut at the left engine mount strut bracket on the engine.
-
Tighten the engine mount strut nut to 48 Nm (35 ft. lbs.).
Engine Mount Strut Replacement - Right
Engine Mount Strut Replacement - Right
Removal Procedure
1. Remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the engine.