Impala V6-3.8L VIN K (2004)
17. Adjust the passenger side radiator shelf tube J 28467-2A and the assembled lift hook bracket J 28467-6A in order to align the hook with the left,
rear of engine, lift hook bracket attached to the left exhaust manifold.
18. Install the lift hook J 28467-7A through the lift hook bracket J 28467-6A.
19. Install the 1/2 inch lift hook washer and lift hook wing nut J 28467-34 onto the lift hook J 28467-7A.
20. Install the assembled lift hook bracket J 28467-6A over the strut tower tube J 28467-3.
21. Adjust the assembled swivel lift hook bracket J 28467-8A in order to align the hook with the right, front of engine, lift hook bracket attached to the
right exhaust manifold.
22. Hand tighten the cross bracket assembly J 28467-1A wing nuts.
23. Hand tighten the lift hook wing nuts J 28467-34 securely to remove all slack from the engine support fixture assembly.
