Impala V6-3.8L VIN K (2004)
Heater Hose: Service and Repair
Heater Pipe Adapter Replacement - Outlet
HEATER PIPE ADAPTER REPLACEMENT - OUTLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the fuel injector sight shield.
3. Use J 38185 in order to position aside the heater hose clamp.
4. Remove the heater outlet hose from the heater pipe adapter.
5. Remove the heater pipe adapter mounting bolt.
6. Remove the heater pipe adapter.
INSTALLATION PROCEDURE