Impala V6-3.8L VIN K (2004)
30. Install the evaporator tube to TXV block fitting nut (1).
Tighten
Tighten the nut to 27 N.m (20 lb ft).
31. Connect the inlet and outlet heater hose to the heater core.
IMPORTANT: Reposition the heater core hose clamps in the indicated location.
32. Use J 38185 in order to reposition the heater hose inlet and outlet clamp to the heater core.
33. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
34. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
35. Connect the battery negative cable.
36. Leak test the fittings of the component using J 39400-A.
