chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 10756 > < Disabling and Enabling|Page 10754
Page 3
background image

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.
4. Remove the IP fuse block cover.

IMPORTANT:  With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate
an SIR system malfunction.

5. Remove the SIR Fuse.

6. Remove the LH insulator panel.
7. Remove the connector position assurance (CPA) from the inflatable restraint steering wheel module coil connector located at the base of the

steering column.

8. Disconnect the steering wheel module coil connector.

Zone 5

IMPORTANT:  Refer to SIR Service Precautions.

Disabling and Enabling|Page 10756 > < Disabling and Enabling|Page 10754