chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 10764 > < Disabling and Enabling|Page 10762
Page 4
background image

5. Install the SIR Fuse.
6. Install the IP fuse block cover.
7. Staying well away from all inflator modules, turn ON the ignition.

7.1.

The AIR BAG indicator will flash 7 times.

7.2.

The AIR BAG indicator will then turn OFF.

8. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.

Zone 7

1. Connect the inflatable restraint side impact module - LF connector (1) located under the driver seat.
2. Install the CPA to the side impact module - LF connector (1).
3. Remove the SIR Fuse.
4. Install the fuse block access cover.
5. Staying well away from all inflator modules and pretensioners, turn ON the ignition.

5.1.

The AIR BAG indicator will flash seven times.

5.2.

The AIR BAG indicator will then turn OFF.

6. Perform Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.

Zone 9

Disabling and Enabling|Page 10764 > < Disabling and Enabling|Page 10762