Impala V6-3.8L VIN K (2004)
Installation Procedure
1. Position the roof console backing plate (2) to the headliner opening.
2. Secure the wiring harness in the original position to the roof console backing plate.
3. Connect the electrical connectors to the roof console.
4. Install the headliner.
5. Install the sunshade anchors.
6. Position the roof console to the roof console backing plate in the headliner.
7. Install the roof console by pressing the console into place until the retainers are completely engaged.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the to the roof console screw.
Tighten the screw to 2 N.m (18 lb in).
Driver Information Center Replacement (UG1, EXC CF5)
Driver Information Center Replacement (UG1, EXC CF5)
Removal Procedure
Important: The driver information center is serviced as part of the complete roof console.
