Impala V6-3.8L VIN K (2004)
Backup Lamp: Service and Repair
BACKUP LAMP REPLACEMENT (IMPALA)
REMOVAL PROCEDURE
1. Open the rear compartment.
2. Remove the wing nuts from the studs on the rear compartment lid applique.
3. Remove the rear compartment lid applique from the rear compartment lid.
4. Remove the backup lamp sockets from the rear compartment lid applique, turning counterclockwise.
5. Remove the backup lamp bulbs from the sockets.
INSTALLATION PROCEDURE
1. Install the backup lamp bulbs to the sockets.
2. Install the sockets to the backup lamp, turning clockwise.
3. Install the rear compartment lid applique to the rear compartment lid.
4. Install the wing nuts to the studs on the rear compartment lid applique and hand tighten.
5. Close the rear compartment.