Impala V6-3.8L VIN K (2004)
Marker Lamp Bulb: Service and Repair
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB
REPLACEMENT (IMPALA)
REMOVAL PROCEDURE
1. Open the hood.
2. Remove the radiator air baffle.
3. Apply light pressure to the headlamp lens to hold the headlamp in place while removing the retainers.
4. Lift up the headlamp retainers to release the headlamp from the upper fascia support.
5. Remove the headlamp from the slots in the upper fascia support.
6. Disconnect the electrical connector from the headlamp.
7. Remove the headlamp from the vehicle.