Impala V6-3.8L VIN K (2004)
7. Remove the accelerator cable from the throttle body lever.
8. Remove the accelerator cable from the accelerator cable bracket.
IMPORTANT: Note the routing of the accelerator cable for removal.
9. Remove the piece of mechanics wire from the cable.
10. Remove the accelerator cable from the vehicle.
INSTALLATION PROCEDURE
NOTE: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be
securely fastened. This is necessary in order to prevent possible interference and damage to the component.
