Impala V6-3.8L VIN K (2004)
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.
4. Remove the fuse block access cover.
5. Remove the SIR Fuse.
IMPORTANT: With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate
an SIR system malfunction.
6. Remove the connector position assurance (CPA) from the side impact module - LF connector (1) located under the driver seat.
7. Disconnect the side impact module - LF connector (1).
Zone 9
IMPORTANT: Refer to SIR Service Precautions.
