Impala V6-3.8L VIN K (2004)
Power Seat Switch: Removal and Replacement
Seat Switch Replacement - Power
Seat Switch Replacement - Power
Removal Procedure
1. Remove the front seat cushion outer trim panel.
2. Remove the power front seat switch from the front seat outer trim panel, using a small flat bladed tool.
3. Disconnect the electrical connector from the power front seat switch.
4. Remove the power front seat switch from the vehicle.
Installation Procedure
1. Connect the electrical connector to the power front seat switch.
2. Install the power front seat switch to the front seat outer trim panel, pressing into place until fully seated.
3. Install the front seat cushion outer trim panel.
Lumbar Switch Replacement
Lumbar Switch Replacement