Impala V6-3.8L VIN K (2004)
1. Install the daytime running lamp (DRL) ambient light sensor to the DRL ambient light sensor connector.
2. Position the DRL ambient light sensor to the opening in the instrument panel (IP) upper trim panel. Twist the DRL ambient light sensor 1/4 turn
clockwise.
3. Verify that the DRL ambient light sensor wiring harness will not be pinched when the IP upper trim panel is installed. Working from right to left,
press down on the IP upper trim panel in order to engage the retainers to the IP upper trim pad.
4. Install the garnish molding to the left windshield pillar.
