Impala V6-3.8L VIN K (2004)
4. Assemble the following bushing removal tools as shown:
4.1. J 21474-27
4.2. J 21474-13
4.3. J 34126
4.4. J 35379
4.5. J 21474-2
4.6. J 21474-4
5. Tighten J21474-4.
6. Disassemble the bushing removal tools.
Installation Procedure
Important: You MUST install the lower control arm vertical bushing in the same position in order to maintain the original vehicle ride, handling, and
road feel.
1. Align the flat edge of the bushing flange to the mark in the control arm (1). Ensure that the flat edge of the bushing flange is 30 degrees (2) from
the centerline of the lower control arm. Ensure that the thin slot in the bushing is facing outboard.
2. Insert the bushing into the control arm.
Important: Apply J23444-A or equivalent to the threads of J 21474-27.
3. Assemble the following bushing installation tools as shown:
