Impala V6-3.8L VIN K (2004)
4.1.
Pull out the tab (1) on the adjuster block side (2) of the actuator.
4.2.
Press on the adjuster block (2) in order to compress the internal adjuster spring and disengage the adjuster teeth. Slide the adjuster block as
far away from the actuator as possible.
4.3./105GLock in place by pushing in on the tab (1).
5. Inspect the actuator
^
The actuator must lock the shift lever clevis when you place the clevis in the park position.
^
If you can move the shift lever without pressing on the brake pedal. readjust the actuator.
6. Install the knee bolster bracket.
