Impala V6-3.8L VIN K (2004)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch Pulse Width Modulation Solenoid
Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect and reposition the electrical connectors from the following:
^
If equipped internal mode switch
^
2 - 3 Shift solenoid valve assembly (315B)
^
Automatic transaxle fluid pressure manual valve position switch assembly (395)
Important: Do NOT remove the bolt (205) that holds the oil pump together.
3. Remove the oil pump bolts (206, 207).
