Impala V6-3.8L VIN K (2004)
21.
Support the left frame rail with a jack stand.
22.
Remove only the left two frame-to-body bolts. DO NOT LOOSEN RIGHT SIDE FRAME-TO-BODY BOLTS.
23.
Lower the frame with jack stand and remove jack stand.
24.
Position the drain pan under transaxle side cover.
25.
Remove the left drive axle from the transaxle. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
26.
Secure the drive axle to the strut assembly.
27.
Lower the vehicle.
28.
Using the engine support fixture lower the engine assembly to access the transaxle case side cover.
29.
Raise the vehicle.
30.
Remove the transaxle mount bracket bolts and the bracket from the transaxle.
31.
Remove the remaining case side cover bolts (56, 57, 58).
