Impala V6-3.8L VIN K (2004)
25.
Lower vehicle to access engine support fixture.
26.
Lower the engine/transmission assembly with the engine support fixture to gain access to remaining side cover bolts.
27.
If replacing the side cover, remove 4 engine mount bracket bolts.
28.
Remove the harness retainer.
29.
Raise vehicle to access side cover bolts.
30.
Remove the case side cover bolts (56-58).
31.
Remove the case side cover pan (53).
32.
Remove the case side cover gasket (54).
33.
Clean the case.
34.
Clean the side cover gasket mating surfaces.
Installation Procedure