Impala V6-3.8L VIN K (2004)
Case: Service and Repair
Case Side Cover Replacement
Removal Procedure
Tools Required
^
J 36850 Transjel Lubricant
1. Disconnect the negative battery cable.
2. Remove the air cleaner intake duct.
3. Remove the accelerator cable bracket with the accelerator and cruise control cables.
4. Remove the transaxle shift cable from the shift lever.
5. Remove the transaxle shift cable bracket bolts and the bracket from the transaxle.
6. Disconnect the transaxle wiring harness connector.
7. Remove the top four case side cover bolts (56, 58).
8. Install the engine support fixture.
9. Raise and support the vehicle.
10. Remove the frame assembly.
11. Remove the left drive axle from the transaxle.
12. Secure the drive axle to the strut assembly.
13. Lower the vehicle.
14. Using the engine support fixture lower the engine assembly to access the transaxle case side cover.
15. Raise the vehicle.