Impala V6-3.8L VIN K (2004)
13. Install a piece of mechanics wile to the end of the automatic transmission range selector cable.
14. Remove the automatic transmission range selector cable through the hole in the cowl.
Installation Procedure
Caution: The automatic transaxle range selector cable is made out of two cable sections. After initial connection never separate the two metal
couplings from one another. Integrity of the connection of the two metal couplings will be lost if separation of the two metal couplings occurs. When
servicing the transaxle remove the cable at the automatic transaxle range selector lever and at the automatic transaxle range selector cable bracket. If
either section of the cable needs to be replaced, replace both of the cable sections. Loss of connection integrity of the two metal couplings can cause
loss of transaxle shift control which could result in personal injury.
1. Install the automatic transmission range selector cable through the hole in the cowl.
2. Remove the mechanics wire from the end of the automatic transmission range selector cable.
3. If equipped with a steering column shift control, install the automatic transmission range selector cable to the shift control lever.
4. Install the left knee bolster bracket.
