Impala V6-3.8L VIN K (2004)
5. Remove the front wheel drive shaft nut (2). Insert a drift or flat bladed tool (1) into the caliper and rotor to prevent from turning.
6. Remove the brake rotor.
7. Use 3 wheel nuts in order to attach the J 42129 to the wheel bearing/hub.
8. Use the J 42129 in order to push the wheel drive shaft out of the wheel bearing/hub.
9. Remove and DISCARD the wheel bearing/hub bolts. Remove the J 42129 from the hub.
Important: Ensure that the wheel drive shaft outer seal/boot is not damaged.
10. Remove the wheel bearing/hub and splash shield-noting the position of the shield for reinstallation.
Installation Procedure