Impala V6-3.8L VIN K (2004)
1. Position the wiper motor crank arm onto the wiper motor.
2. Measure the gap between wiper motor crank arm and the bracket tab. If the gap is not 4-8 mm (0.157-0.314 in), remove the wiper motor crank
arm and repeat installation.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the wiper motor crank arm screw.
Tighten
Tighten the screw to 16 N.m (12 lb ft).
4. Install the wiper motor crank arm cover.
