Impala V6-3.9L (2007)
2. Position the engine support table with the frame under the vehicle.
3. Lower the vehicle to the frame.
4. Loosely install the bolts (1) to secure the frame to the body.
Notice: Refer to Fastener Notice .
5. Align the frame to the body by inserting two 19X203 mm (0.74X8.0 in) pins in the alignment holes (2) on the right side of the frame.
*
Tighten the new front frame bolts to 145 N.m (107 lb ft).
*
Tighten the new rear frame bolts to 160 N.m (118 lb ft).