Impala V6-3.9L (2007)
3. Install the lower bolts (2) to the engine oil cooler/power steering cooler bracket.
Tighten the bolts to 2 N.m (18 lb in).
4. Install the engine oil cooler lines to the engine oil cooler.
5. Install the power steering oil cooler lines to the power steering cooler.
6. Reposition the hose clamps on the power steering cooler lines.
7. Install the support clip to the engine oil cooler lines.
8. Install the right engine splash shield.
9. Install the lower air baffle.
10. Install the upper air baffle.
11. Add the proper amount of engine oil and power steering fluid.