Impala V6-3.9L (2007)
Fluid Pressure Sensor/Switch: Service and Repair
Torque Converter Clutch Pulse Width Modulation Solenoid Replacement
Torque Converter Clutch Pulse Width Modulation Solenoid Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect and reposition the electrical connectors from the following:
*
If equipped internal mode switch
*
2-3 Shift solenoid valve assembly (315B)
*
Automatic transaxle fluid pressure manual valve position switch assembly (395)
Important: Do NOT remove the bolt (205) that holds the oil pump together.
3. Remove the oil pump bolts (206,207).
4. Remove the oil pump (200) from the valve body (300).
