Impala V8-5.3L (2008)
Notice: Refer to Fastener Notice.
2. Install the outside handle bolt (2) through the latch hole.
Tighten the bolt to 10 N.m (89 lb in).
3. Install the bolts (3) to the rear door handle.
Tighten the bolt to 10 N.m (89 lb in).
4. Install the rear door lock.
5. Install the outside door handle bolt access tape.
6. Install the outside handle rod into the clip.
7. Close the clip cover over the outside door handle rod.
8. Inspect the outside door handle for proper operation.
9. Remove the masking tape.
10. Install the rear door water deflector.
11. Install the rear door trim panel.
