Impala V8-5.3L (2008)
1. Position the park brake cable into the support bracket and install the cable retaining pin.
2. Install the park brake cable to the actuator lever.
3. Connect the retainer (1) that holds the cable to the support bracket.
4. Connect the rear cable to the front cable.
*
For the right rear cable, connect the cable (3) to the clip (2).
*
For the left rear cable, install the equalizer stud to the equalizer nut, which is part of the equalizer assembly.
5. Adjust the park brake. Refer to Park Brake Adjustment (See: Adjustments) .
6. Lower the vehicle.
