Impala V8-5.3L (2008)
4. Install the engine mount bracket.
5. Install the engine mount bracket bolts.
Tighten the bolts to 50 N.m (37 lb ft).
6. Using the engine support fixture, lower the engine .
7. Remove the engine support fixture.
8. Install the upper engine mount nuts.
Tighten the nuts to 50 N.m (37 lb ft).
9. Install the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (RPO LS4) (See: Exhaust System/Exhaust
Manifold/Service and Repair/Exhaust Manifold Replacement - Right Side)Exhaust Manifold Replacement - Right Side (RPOs LZE/LZ4/LZ8) (
See: Exhaust System/Exhaust Manifold/Service and Repair/Exhaust Manifold Replacement - Right Side) .
10. Install the engine mount strut. Refer to Engine Mount Strut Replacement (See: ) .