chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 20281 > < Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 20279
Page 3
background image

*

The handle must rotate the spotlamp approximately 90 degrees about the spot lamp shaft axis from the parked position to the vertical position.

*

The spot lamp head must rotate 360 degrees about its axis.

*

The spot lamp must able to be turned ON/OFF independent of the ignition switch.

13. If spot lamp adjustment and/or electrical diagnosis are required, refer to the following procedures.

*

For spot lamp travel adjustment, refer to Spot Lamp Travel Adjustment (Impala RPO 7X6, 7X7).

*

For electrical diagnosis, refer to Power Distribution Schematics.

Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 20281 > < Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 20279