Impala V8-5.3L (2008)
Notice: Refer to Fastener Notice.
6. Install the heater pipe assembly retaining bolts to the rear of the engine.
Tighten all the heater pipe assembly bolts to 16 N.m (12 lb ft).
7. Connect heater hoses to the heater pipe assembly.
8. Install the heater hose clamps into position using the J 38185.
9. Install the air cleaner assembly.
10. Fill the cooling system. Refer to Cooling System Draining and Filling (9C1, 9C3 Static Fill) Cooling System Draining and Filling (LZE, LZ4,
LZG, 9C1, 9C3, GE47716 Fill) Cooling System Draining and Filling (LZE, LZ4, LZG, Static Fill).