Impala V8-5.3L (2008)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
) .
3. Disconnect the vehicle speed sensor (VSS) electrical connector.
4. Remove the VSS bolt (9).
5. Remove the VSS (10) from the extension case.
6. Remove the O-ring (11) from the VSS (10).
Installation Procedure
