Impala V8-5.3L (2008)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the ignition lock cylinder.
3. Remove the ignition switch.
4. Remove the steering column tilt head components.
5. Remove the turn signal switch housing.
6. Remove the turn signal and multifunction switch assembly only.
