Impala V8-5.3L (2008)
Notice: Refer to Fastener Notice .
3. Install the wheel bearing/hub-to-knuckle bolts.
Tighten the bolts to 75 N.m (55 lb ft).
4. Install the park brake cable to the park brake actuator. Refer to Parking Brake Rear Cable Replacement (Z7U) .
Rear Wheel Speed Sensors
5. Install the ABS electrical connector to the wheel speed sensor (1), if equipped.
6. Install the brake rotor. Refer to Rear Brake Rotor Replacement .
7. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
8. Lower the vehicle.
