Impala V8-5.3L (2008)
4. Connect the TOC inlet hose to the transaxle. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
(See: ) .
5. Connect the TOC outlet hose to the transaxle. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection (See: ) .
Notice: Refer to Fastener Notice .
6. Install the TOC hose retainer and the bolt.
Tighten the bolt to 25 N.m (18 lb ft).
7. Lower the vehicle.
8. Connect the TOC outlet hose to the top side of the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection
and Connection (See: ) .
Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
9. Adjust the fluid level. Refer to the following procedures:
*
Transmission Fluid Check (See: Testing and Inspection/Component Tests and General Diagnostics/Transmission Fluid Check)
*
Fluid and Lubricant Recommendations
*
Approximate Fluid Capacities
