Impala V8-5.3L (2008)
Important: Keep the cutting edge of the tool against the window.
9. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinch-weld flange.
*
The only suitable lubrication is clear water.
*
Use J 24402-A, J 39032 or equivalent in order to remove the window.
10. Remove the windshield (1) from the vehicle with the aid of an assistant (2).
Installation Procedure
1. Install a stationary window into the opening.
2. Install the rearview mirror.
3. Install the windshield garnish molding.
4. Install the air inlet grille.
5. Install the windshield wipers arms and blades.
6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
7. Close the hood.
