Impala V8-5.3L VIN C (2006)
Cooling System Air Bleeder Pipe / Hose: Service and Repair
Coolant Air Bleed Hose Replacement
Coolant Air Bleed Hose Replacement (RPO LS4)
Removal Procedure
1. Drain a small amount of coolant from the radiator. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling
System (LZE, LZ4, LZ9 Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE
47716 Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill).
2. Reposition the coolant air bleed hose clamp (322) at the coolant air bleed pipe (307).
3. Reposition the coolant air bleed hose clamp (322) at the water manifold.
4. Remove the coolant air bleed hose from the water manifold.
5. Remove the coolant air bleed hose from the coolant air bleed pipe.
6. Remove the clamps from the coolant air bleed hose, if necessary.
Installation Procedure
1. Install the clamps onto the coolant air bleed hose, if necessary.
2. Install the coolant air bleed hose onto the coolant air bleed pipe.
3. Install the coolant air bleed hose onto the water manifold.
4. Position the coolant air bleed hose clamp (322) at the water manifold.
5. Position the coolant air bleed hose clamp (322) at the coolant air bleed pipe (307).
6. Refill the coolant system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9
Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and
Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill), as necessary.