Impala V8-5.3L VIN C (2006)
5. Important: Remove only the outer gasket from the manifold. Do not disassemble any of the internal components of the manifold in an attempt to
remove the eight inner sealing gaskets. If the inner gaskets are cut or damaged, replace the manifold as an assembly. Only use a wire-cutter type
tool in order to minimize the amount of debris. Do not use a rotary-type cutting tool on the retaining straps.
Identify the 8 gasket retaining strap locations (1-8).
6. Using a wire-cutter type tool, snip the 8 retaining straps of the outer gasket.
7. Remove the outer gasket (556) from the manifold.
