Impala V8-5.3L VIN C (2006)
1. Install the engine mount bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bracket bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Using the engine support fixture, lower the engine.
4. Remove the engine support fixture.
5. Install the upper engine mount nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
6. Install the left exhaust manifold.
7. Install the engine mount strut.