Impala V8-5.3L VIN C (2006)
2. Install a NEW engine oil filter (437).
Tighten the filter to 30 Nm (22 ft. lbs.).
3. Install the oil pan drain plug (430) and O-ring (429).
Tighten the drain plug to 25 Nm (18 ft. lbs.).
4. Lower the vehicle.
5. Fill the engine with the appropriate amount and type of NEW engine oil. Refer to Capacities - Approximate Fluid and Fluid and Lubricant
Recommendations.
6. Check the oil level.
7. Install the oil fill cap.
8. Close the hood.
9. Reset the engine oil life monitor, if necessary. Refer to GM Oil Life System - Resetting. See: Instrument Panel, Gauges and Warning
Indicators/Oil Change Reminder Lamp/Service and Repair