Impala V8-5.3L VIN C (2006)
6. Install the heater pipe assembly retaining bolts to the rear of the engine.
NOTE: Refer to Fastener Notice.
Tighten all the heater pipe assembly bolts to 16 N.m (12 lb ft).
7. Connect heater hoses to the heater pipe assembly.
8. Install the heater hose clamps into position using the J 38185.
9. Install the air cleaner assembly.
10. Fill the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9
Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and
Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill). See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
