Impala V8-5.3L VIN C (2006)
2. Connect the roof rail module - left connector to the vehicle harness connector.
3. Install the CPA to the roof rail module - left connector.
4. Install the garnish molding to the upper lock pillar.
5. Connect the seat belt retractor pretensioner - LF connector (2) to vehicle harness connector (1).
6. Install the CPA (3) to the seat belt retractor pretensioner - LF connector (2).
7. Install the lower center pillar trim.
8. Connect the steering wheel module coil connector (1) to the vehicle harness connector (3).
9. Install the CPA to the steering wheel module coil connector (1).
10. Install the left outer trim cover to the I/P.
