Impala V8-5.3L VIN C (2006)
11. Connect the roof rail module - right connector to the vehicle harness connector.
12. Install the CPA to the roof rail module - right connector.
13. Install the garnish molding to the upper lock pillar.
14. Connect the seat belt retractor pretensioner - RF connector (2) to vehicle harness connector (1).
15. Install the CPA (3) to the seat belt retractor pretensioner - RF connector (2).
16. Install the lower center pillar trim.
17. Connect the I/P module connector (1) to the vehicle harness connector (2).
18. Install the CPA to the I/P module connector (1).
19. Install the right outer trim cover to the I/P (3).
20. Install both Air Bag Fuses, one in the underhood fuse center and one in the interior fuse center.
21. Replace both fuse center covers.
