Impala V8-5.3L VIN C (2006)
Heater Hose: Service and Repair
Heater Hose Replacement - Inlet
HEATER HOSE REPLACEMENT - INLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9
Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and
Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill). See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
2. Use J 38185 to reposition the heater inlet hose clamp at the heater pipe.
3. Remove the heater inlet hose (1) from the heater pipe.
IMPORTANT: Cap or plug the cooling components to prevent system contamination.
4. Use J 38185 to reposition the heater inlet hose clamp at the heater core.
5. Remove the heater inlet hose (1) from the heater core.
INSTALLATION PROCEDURE
