chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Diagram Information and Instructions|Page 7005

Impala V8-5.3L VIN C (2006)

Page 2
background image

1. Lubricate the O-ring seal with clean engine oil.
2. Install the O-ring seal (704) onto the CMP sensor, if necessary.
3. Install the CMP sensor (703).
4. Remove the CMP sensor bolt (705).

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 12 N.m (106 lb in).

5. Connect the CMP sensor electrical connector.

Coolant Temperature Sensor/Switch (For Computer) > < Diagram Information and Instructions|Page 7005