Impala V8-5.3L VIN C (2006)
Evaporative Emissions Hose: Service and Repair
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - ENGINE/CHASSIS
REMOVAL PROCEDURE
IMPORTANT: Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the line in order the avoid possible
system contamination.
1. Remove the engine sight shield.
2. Remove the air cleaner outlet duct.
3. Remove the brake master cylinder and reposition.
4. Disconnect the EVAP (2) line from the purge solenoid.
5. Open the fuel/brake pipe retainers (1).
6. Remove the EVAP line from the fuel/brake pipe retainers (1).
7. Raise and support the vehicle. Refer to Vehicle Lifting.