Impala V8-5.3L VIN C (2006)
7. Pull back the carpet from the front lower right/passenger door pillar to expose the interior fuse center (1). Refer to Junction Block Replacement -
Accessory Wiring.
8. Remove the cover then locate and remove the Air Bag Fuse from the interior fuse center.
9. To disable the seat belt retractor pretensioner - RF, go to step 10. To disable the roof rail module - right, go to step 13 and for the side impact
sensor (SIS) - right, go to step 16.
10. Remove the lower center pillar trim.
11. Remove the connector position assurance (CPA) (3) from the seat belt retractor pretensioner - RF connector (2).
12. Disconnect the seat belt retractor pretensioner - RF connector (2) from the vehicle harness connector (1).