Impala V8-5.3L VIN C (2006)
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the threads of the oil pressure sensor.
2. Notice: Refer to Fastener Notice in Service Precautions.
Using J41712, install the oil pressure sensor (706) and washer (707).
Tighten the sensor to 20 Nm (15 ft. lbs.).
3. Connect the oil pressure sensor electrical connector (4).
4. If necessary, install the engine sight shield. Refer to Engine Sight Shield Replacement.